Advanced Deburring & Finishing

Home

Deburring & Finishing

Vibratory Deburring

Spindle Deburring

Wet Blasting

Deburring Supplies

Cleaning

Immersion Agitation

Immersion Ultrasonics

Solvent Systems

Continuous Flow

Cabinet Spray Washers

Heavy Duty Applications

Cleaning Supplies

Contract Services

Process Development

About Us

Contact Us

We Sell The System

Immersion Agitation Parts Washers


Replacing solvent degreasers with a Ramco Migi-Kleen Immersion Parts Washer
Creating a healthier workplace necessitates the removal of toxic chemicals and hazardous wastes. Traditional solvent cleaning is primarily a dipping process using aggressive chemicals to do most, if not all of the work. Modern detergent cleaning is a washing process using safer milder chemicals in high performance washing systems. The equipment must provide sufficient mechanical agitation, part orientation and "bath conditioning" apparatus to activate, accelerate and facilitate that process. Ramco has been designing and manufacturing flexible washing systems for environmentally safe parts washing for over 60 years. Migi-Kleen parts washers are designed to meet demanding cleanliness specifications.

The Migi-Kleen Washer:
Migi-Kleen is an immersion parts washer designed for the removal of oils, chips and dirt from a wide range of components.  Within the Migi-Kleen washer an elevator is used to transport components into and out of each chamber. More importantly the elevator is to position and continuously move components within the working zone during the process. This is referred to as "Dynamic Flow Combination" it is a function that allows these parts washing systems to achieve superior results in washing, rinsing and drying. The effect of Dynamic Flow Comination is more consistent results and accelerating processing times due to better coverage of component surfaces (removeing inconsistencies caused by standing waves or shadowing).

Typical Applications

  • Removal of oil and chips from machined components, castings and housings
  • Cleaning prior to welding, brazing, deburring or blasting
  • Removal of buffing or lapping compounds
  • Precision cleaning prior to assembly or final packaging
  • General washing for maintenance, rework or remanufacturing
  • Carbon, rust, ink and paint removal
  • Passivation, phosphating, alodine
  • Tube Cleaning
  • FPI - preclean, penetrant process, post clean.

 Need ultrasonic cleaning? Check out our console unit.


Ramco Migi-Kleen Stainless Steel Parts Washer with Turbo/Filter and Oil Removal Options
Ramco MK48SS w/ Turbo/Filter & OR6-CVS Oil Removal
Showing the Turbo/Filter System, an optional item for the Ramco Migi-Kleen Parts Washers
Ramco Turbo/Filter System: provides an even flow of turbulent solution over, under and thru components.
In addition, utilizing a standard dryer or a blow-off dryer as shown below can compliment our standard washer by removing entrapped or puddled liquid.
Ramco Migi-Kleen Stainless Steel Parts Washer with Air Blow-Off Dryer
Ramco MK36SS Parts Washer with Air Blow-off Dryer
MK36SS Air Blow-off view from side
MK36SS Air Blow-Off Dryer
Machine castings in MK36SS Air Blow-Off Option
Machine Castings in Air Blow-Off dryer using an air knife, manifolds and flow controls
Call us for a budgetary quote at 800-553-7060


home | deburring & finishing | cleaning | contract services | process development 
about us | contact us | sitemap

Advanced Deburring & Finishing
1.800.553.7060

Web Hosting powered by Network Solutions®